Are you looking for a guide to taping your epoxy resin? Do you want to know what type of tape your epoxy resin will not stick to? Well, If your answer is. Yes, you are at the proper halt.
Believe me or not, taping epoxy resin is one of the greatest favor you could do to your epoxy resin. Taping helps to fill the epoxy resin correctly and prevents edges from being smooth and fine, thus presenting error-free edges.
Hang out with this article till the end to know with what kind of tape you can extract the maximum benefits of taping your epoxy resin.
Table of Contents
Why is there a need for non-stocking tape for epoxy resin –
Epoxy resin is a viscous liquid that requires much care when poured onto the mold. This is where one of the main purposes of using tape comes in.
For taping epoxy resin, you will require tape, of course, but you will have to be smart enough to rely on tape that doesn’t stick to the surface of the epoxy resin.
The reason is that if the tape and epoxy resin get stuck, the whole casting will get destroyed, leading to vain efforts.
The tape has one of its sides as an adhesive side which, when one gets intact with the epoxy resin, may spoil the desired shape and durability of the epoxy resin.
What tape doesn’t stick to the epoxy resin –
Suppose you are looking for suggestions for the kind of tape that does not stick to your epoxy resin and can be easy to work with. Then I have got your back. I will be helping you to choose the best tape for your epoxy resin.
1. Sheathing or painter’s tape – Yes, I have Sheathering or painter’s tape to recommend to you for that purpose. It is among the ideal tapes to use for tapping epoxy resin.
Using the tape over the surface before actually pouring the epoxy resin is preferred. Once the resin is cured, the tape can be removed hassle-free.
The significant advantage of using painter’s tape for the epoxy resin is that it’s effective and comes under budget.
In addition, it has other benefits over other tapes; it doesn’t affect the shine and gloss of the epoxy resin; instead, it tries to regain the same.
The disadvantage of painter’s tape is almost negligible because taping is always followed by sanding and polishing the epoxy resin, so you can permanently hide the seams with the polish.
2. Epoxy Release Tape –
It is a solid and not-stretch tape with multiple applications for epoxy resin. It has one adhesive side that sticks to the surface of the epoxy resin and does its job wonderfully.
This type of tape barely gives any obstacle in achieving the purpose, but you never know! Therefore, I prefer using the tape with all the guidelines to avoid complications. You may learn how to tape the epoxy resin’s edges.
3. Aluminum Tape – It may sound weird, but this tape can prove magical when used for epoxy resin.
It works well to join or lock against moisture and vapor and has one adhesion side to be stuck on the surface of the epoxy resin.
You need to be extra careful when peeling off the aluminum tape, as it may leave traces.
4. PVC tapes – Yes, polyvinyl chloride tape, often known as monsoon tapes, works well against moisture and can be a great addition in taping the epoxy resin.
It helps to build the joins and is easy to use. It is perfectly smooth and has one-side adhesion for a perfect touch over the surface of the epoxy resin.
Keep the surface clean and dry before using this tape to minimize complications during release. Also, you should not stretch the PVC tape as it may shrink and deteriorate its quality of work.
You can get these tapes easily online at very affordable prices. If you want to buy it personally, you can also rely on any local hardware shop as they are readily available there.
Epoxy resin and its resistivity with some other materials –
If you want to use taping to avoid your epoxy resin overflowing, you can’t get it at the last moment, creating a hurdle between you and your masterpiece!
What If I tell you I actually don’t have one solution but many solutions for you? Well, in that case!
You can rely on some other materials that can work similarly and will not stick to the surface of the epoxy resin.
Here are a couple of the materials that strongly resist epoxy resin; therefore, they can be easily relied on while taping the surface of the epoxy resin.
1. Hot Glue – If you are running short on the tape for your epoxy resin, worry not! I have an easy-peasy solution to your problem.
If you have hot glue with you, all you have to do is to pour it to stop the overflowing around the area where the epoxy resin has to be poured.
However, it is not an easy task to remove it from the surface of the epoxy resin, and it can also leave its marks.
2. Parchment or wax Paper – Epoxy resin is super resistant to wax paper, and that’s why you can trustfully rely on using it on the edges of your epoxy resin or its base.
However, using parchment or wax paper may give a cloudy result as it interferes with the super quality of the epoxy resin. Also, the wax paper does not stay stable and may cause issues while casting with epoxy resin.
You can learn more about using masking tape for the epoxy resin.
FAQ’s –
1. How can I remove the tape if it gets stuck to the surface of the epoxy resin?
If you face the issue of using any ordinary tape that gets stuck to your epoxy resin, then you prefer to leave it for a while and return to it after being calm.
Don’t use any sharp objects in hastiness. Instead, try to remove it slowly and reluctantly in a regular manner. You can even take the help of any greasy liquid by pouring it on the surface and peeling it off.
2. Can taping the surface of epoxy resin spoil it?
Although taping is meant to protect the surface of the epoxy resin, sometimes, in the worst-case scenario, it can produce scratches and cracks.
Do not lose out. Instead, rely on the best polish to recover, regain shine, and fill the irregularities. (Read the article ‘Can you put tape on epoxy?’ for better insight).
3. When should I prefer taping the epoxy resin?
If you use tape before pouring your epoxy resin, then prefer sticking it for 5-10 minutes and spending time sticking it properly.
To prevent the edges of the epoxy resin, ensure the surface is completely cured to avoid spoiling the epoxy resin casting.
Conclusion –
Taping the epoxy resin surface for the better pouring of the resin, better release of the epoxy resin casting, and better creation of the breaks-free edges is the easiest way.
Additionally, it has so much to offer to generate a finished product that this stage can’t be compromised with anything.
I hope you got your answers to one of the significant concerns among them, ‘what kind of tape does epoxy resin doesn’t stick to?’ Make sure to make the best choice to yield the best results. This is the only secret key.
Share this article if you find this helpful, and leave comments for us on how your experience was with the taping of the epoxy resin. Happy Epoxy Resin Casting!